Simulating a Multi-Stage Rolling Mill Process, Part 3: Tension Control

해당 시리즈: Simulating a Multi-Stage Rolling Mill Process

Alec Stothert, MathWorks

This webinar is the third in a three-part series that highlights the use of MathWorks products for modeling and control of a multistage rolling mill process. In this webinar, you will learn how to design PID controllers for managing tension in a multistage rolling mill process. You will also see how you can use the linearization and tuning capabilities of Simulink Control Design to achieve the frequency and time domain specifications of your designs. Through product demonstrations, MathWorks engineers will show how you can:

  • Use the design features available in the new PID Controller block user interface
  • Tune PID blocks to meet time and frequency domain design requirements

Product Focus

  • Simulink Control Design
  • Simulink

녹화된: 2009년12월17일

시리즈: Simulating a Multi-Stage Rolling Mill Process

Part 1: Modeling and Control of Strip Thickness and Speed
In this webinar MathWorks engineers demonstrate the benefits of using Simulink as a platform for modeling and control system design for a sheet-metal-rolling application.

Part 2: Tension Modeling and Simulation
In this particular webinar you will learn how to use MathWorks products to model the looper-strip interaction for tension control.

Part 3: Tension Control
In this webinar, you will learn how to design PID controllers for managing tension in a multistage rolling mill process.