This is machine translation

Translated by Microsoft
Mouse over text to see original. Click the button below to return to the English verison of the page.

라이선스가 부여된 사용자만 번역 문서를 볼 수 있습니다. 번역 문서를 보려면 로그인하십시오.


Color axis scaling


caxis([cmin cmax])
caxis auto
caxis manual
v = caxis


caxis controls the mapping of data values to the colormap. It affects any surface, patch, or image with indexed CData and CDataMapping set to scaled. It does not affect surfaces, patches, or images with true color CData or with CDataMapping set to direct.

caxis([cmin cmax]) sets the color limits to specified minimum and maximum values. Data values less than cmin or greater than cmax map to cmin and cmax, respectively. Values between cmin and cmax linearly map to the current colormap.

caxis auto computes the color limits automatically using the minimum and maximum data values. This is the default behavior. Color values set to Inf map to the maximum color, and values set to -Inf map to the minimum color. Faces or edges with color values set to NaN are not drawn.

caxis manual and caxis(caxis)freeze the color axis scaling at the current limits. This enables subsequent plots to use the same limits when hold is on.

v = caxis returns a two-element row vector containing the [cmin cmax] currently in use.

caxis(axes_handle,...) uses the axes specified by axes_handle instead of the current axes.

caxis changes the CLim and CLimMode properties of axes graphics objects.


collapse all

Define X, Y, and Z as data for a sphere and view the data as a surface. Define the colors for the surface, C.

[X,Y,Z] = sphere;
C = Z;

Values of C are in the range [-1,1]. Values of C near -1 are assigned the lowest values in the colormap. Values of C near 1 are assigned the highest values in the colormap.

Map the top half of the surface to the highest value in the color table by setting the maximum color limit to 0.


Reset the axis scaling back to its default range.

caxis auto

Return the values of the current color limits.

v = caxis
v =

    -1     1

Load the cape file which contains the image data, X, and the colormap, map, for Cape Cod, Massachusetts.

load cape

Display the image with CDataMapping set to scaled, and use the map colormap.


The color limits span the range of the image data, which is 1 to 192. The blue color of the ocean is the first color in the colormap and is mapped to the lowest data value, 1. You can effectively move sea level by changing the lower color limit value using caxis.

Display the image data using four different color limit values.

load cape


title('caxis = [1 192]')

caxis([4,192]) % change caxis
title('caxis = [4 192]')

caxis([7,192]) % change caxis
title('caxis = [7 192]')

caxis([10,192]) % change caxis
title('caxis = [10 192]')

More About

collapse all


How Color Axis Scaling Works

Surface, patch, and image graphics objects having indexed CData and CDataMapping set to scaled map CData values to colors in the figure colormap each time they render. CData values equal to or less than cmin map to the first color value in the colormap, and CData values equal to or greater than cmax map to the last color value in the colormap. The following linear transformation is performed on the intermediate values (referred to as C below) to map them to an entry in the colormap (whose length is m, and whose row index is referred to as index below).

index = fix((C-cmin)/(cmax-cmin)*m)+1;
%Clamp values outside the range [1 m]
index(index<1) = 1;
index(index>m) = m; 

See Also

| | | | | | |

Introduced before R2006a

Was this topic helpful?