Main Content

테스트 및 측정

파형 생성, 파일 IO 형식, 시각화 및 성능 분석

파형을 생성하고 정량적 툴을 사용하여 시스템 성능을 측정합니다. 성상도 및 Eye 다이어그램과 같은 그래픽 유틸리티를 사용하여 다양한 손상 및 보정의 효과를 시각화합니다.

캡처된 신호를 처리하기 위해 지원되는 파일 형식으로는 이진 기저대역 신호 및 NI™ TDMS(technical data management solution) 형식 파일 등이 있습니다. TDMS 파일을 개별적으로 읽거나 TDMS 파일 모음을 동시에 읽어 데이터를 테이블 또는 타임테이블로 읽어올 수 있습니다.

무선 파형 생성기변조된 파형을 생성, 손상 추가, 시각화 및 내보내기
비트 오류율 분석Analyze BER performance of communications systems

함수

모두 확장

biterr비트 오류 개수 및 비트 오류율(BER)
symerrCompute number of symbol errors and symbol error rate
berawgnAWGN 채널에 대한 코딩되지 않은 데이터의 BER과 SER
bercodingBER for coded AWGN channels
berconfintError probability estimate and confidence interval of Monte Carlo simulation
berfadingBER and SER for uncoded data over Rayleigh and Rician fading channels
berfitFit curve to nonsmooth empirical BER data
bersyncBER for imperfect synchronization
semianalyticBER using semianalytic technique
scatterplotIQ 평면에 입력 신호 표시
eyediagramEye 다이어그램 생성
plotPhaseNoiseFilterPlot response of phase noise filter block
marcumq일반화된 Marcum Q-함수
noisebwEquivalent noise bandwidth of digital lowpass filter
qfuncQ 함수
qfuncinv역 Q 함수
showcommblockdatatypetableCommunications Toolbox block characteristics
tdmsreadRead data from TDMS file (R2022a 이후)
tdmswriteWrite data to TDMS file (R2022b 이후)
tdmsinfoInformation about TDMS file (R2022a 이후)
tdmsreadpropRead properties as single row table from TDMS file (R2022a 이후)
tdmswritepropWrite properties to TDMS file (R2022b 이후)

객체

모두 확장

comm.ACPRMeasure adjacent channel power ratio (ACPR)
comm.ErrorRateCompute bit or symbol error rate of input data
comm.EVMMeasure error vector magnitude (EVM) of received signal
comm.MERMeasure modulation error ratio of received signal
powermeterMeasure power and CCDF of the power of voltage signal (R2021a 이후)
comm.ConstellationDiagramDisplay and analyze input signals in IQ-plane
spectrumAnalyzerDisplay frequency spectrum of time-domain signals (R2022a 이후)
timescopeDisplay time-domain signals (R2020a 이후)
dsp.ArrayPlotDisplay vectors or arrays
comm.BasebandFileReaderRead baseband signal from file
comm.BasebandFileWriterWrite baseband signal to file
vita49ReaderVITA 49 file reader (R2022b 이후)
tdmsDatastoreDatastore for collection of TDMS files (R2022a 이후)

블록

모두 확장

Error Rate CalculationCompute bit error rate or symbol error rate of input data
EVM MeasurementMeasure error vector magnitude (EVM)
MER MeasurementMeasure modulation error ratio in digital modulation applications
Power MeterMeasure power and the CCDF of the power of voltage signal in Simulink (R2021a 이후)
Constellation DiagramDisplay and analyze input signals in IQ-plane
Eye DiagramDisplay eye diagram of time-domain signal (R2023b 이후)
Time ScopeDisplay and analyze signals generated during simulation and log signal data to MATLAB
Spectrum AnalyzerDisplay frequency spectrum
Waveform From Wireless Waveform Generator AppWireless waveform source exported to Simulink (R2021b 이후)
Baseband File WriterWrite baseband signals to file
Baseband File ReaderRead baseband signals from file

도움말 항목